Loading...
Free shipping on orders $50 or more
All ink & toner come with a one-year 100% satisfaction guarantee.
Our products will never void your printer's warranty.

Replacement Xerox WorkCentre 4118X Toner Cartridges

Loading...
  • Xerox 006R01278 Toner Cartridge Black, Single Pack
    Retail Price: $132.99
    $47.99
    Save $85.00 (64% off retail price)
    OUT OF STOCK
  • Xerox 113R00671 Drum Unit Black, Single Pack
    Retail Price: $142.99
    $45.99
    Save $97.00 (68% off retail price)
    OUT OF STOCK

How to Install Xerox WorkCentre 4118X Toner Cartridges?

  1. Open the printer's side cover by pulling the release latch. Open the printer's front cover as well.
  2. Turn the lock lever to unlock position, then carefully pull the toner cartridge out from the printer.
  3. Get your new CompAndSave Xerox WorkCentre 4118X printer toner cartridge. Open the cartridge over a sink or garbage can to avoid any messes in case of a powder leak, as sometimes, factories tend to overfill toner cartridges. Shake the toner cartridge for about five to six times and avoid touching the bottom part of the toner. Then remove the covering tape that is usually bright in color, as well as the plastic protective case, if there is, before installing it.
  4. Insert the new toner cartridge into the slot until it is firmly seated in place. Turn the lock lever back to locked position.
  5. Close the front and the side cover.

Xerox WorkCentre 4118X Toner Cartridges FAQ's

How do I get more life out of my toner cartridge?
Make sure that the toner is not clogged. To check and clean the toner, grab a damp paper towel and wipe the nozzle of the toner cartridge to remove any clog if there is. The next thing you can do is to remove the toner cartridge from the printer, and cover it with plastic or anything that can protect it from leaking. Then shake the toner cartridge. One other thing you can do it to adjust the settings of the printer settings to "Print in grayscale," which will help your printer avoid printing in "rich black."
Why is my toner cartridge not working?
First, make sure that you are using the right toner cartridge for your printer. To verify, you may check the printer's manual and check if you installed the right model number of toner to your printer. Next, is to remove the toner cartridge from the printer, then shake the toner cartridge for about 5 to 6 times. Make sure to cover the cartridge with plastic to avoid leaking. After this, make sure that the toner is properly seated to its slot and make sure that it is secured in place. For more troubleshooting tips, click Troubleshooting Tips and you will be redirected to the right page.